Polycom MGC Administrator, Administrator'S Manual

Page: 370 / 584

Chapter 5 - MCU System Management
5-134
Only one Network type can be set for clocking.
4. In the Edit Value field, enter YES to enable it and click the Set Value
button to apply it to the field.
5. Click OK to update the MCU with the changes.
MPI only MPI The network clock is enabled
only when the span coming from
the DCE to the MCU is active
(i.e. handles a call). Therefore,
the spans defined as primary
and backup clock must be
connected first when starting a
conference, and disconnected
last when terminating the
conference.
ATM and MPI MPI The network clock is enabled
only when the span coming from
the DCE to the MCU is active
(i.e. handles a call). Therefore,
the spans defined as primary
and backup clocks must be
active at all times (i.e. leased
mode).
Table 5-16: Clocking Options (Continued)
Networks
connected to
the MCU
Network selected
for clocking
Notes
For information about setting the primary and backup clocks, see “Assigning the
ISDN Network Service to the Net-2/Net-4/Net-8 Card” on page 3-34.