Polycom MGC Administrator, Administrator'S Manual

Page: 314 / 584

Chapter 5 - MCU System Management
5-78
rate.
When set to YES, the encoder reverts momentarily to 30 frames/sec.
video when detecting fast frame movements (a lot of changes between
consecutive frames).
• LIMIT_AUTO_VSW_H263_FORMAT = NO
Set to YES to prevent the opening of H263 4CIF and higher resolution in
Highest Common conferences.
When set at NO, no limits are placed on H.263 resolution in highest
common mode.
Section CHAIR/FECC
•
FECC_GW = YES
YES - Enables FECC capabilities in all gateway calls.
NO - Disables FECC capabilities in all gateway calls.
•
FECC = YES
YES - Enables FECC conferencing.
NO - Disables FECC conferencing.
• WAIT_FOR_CHAIR_VIDEO_TYPE_NEW = 1
When a conference is set to wait for the chairperson and participants
connect to the conference before the chairperson, the participants are
placed on hold until the chairperson joins the conference.
1 - While on hold the participants can view each other and their audio is
muted.
0 - While on hold the participants view the Welcome slide and hear
background music.
Section T120
• T120 = YES
When enabled, activates T.120 for ISDN participants.
• H323_T120 = YES
When enabled, activates T.120 for IP.
Section FREE SERVICES
• FREE_SERVICES = NO
Enables Net Service Hunting (H.320) in case the first Net Service over-
exceeds its maximum capacity.