Polycom MGC Administrator, Administrator'S Manual

Page: 160 / 584

Chapter 3 - Defining Network Services
3-110
Assigning the MPI Network Service to the MPI Network
Interface Module
To enable the connection between the MGC unit and DCE, you must assign
the MPI network service to the appropriate span of the MPI Network interface
module.
To assign the Network Service to the MPI Network Interface module:
1. In the Browser pane, right-click the slot containing the MPI card and
then click Properties .
Alternatively, double-click the slot containing the MPI card.
For information about clocking in a serial-only environment (no ISDN), see
“Clocking in Serial Environment” on page 5-135.