Polycom MGC Administrator, Administrator'S Manual

Page: 269 / 584

MGC Administrator’s Guide
5-33
The information displayed in the automatic connection may be limited
and too general. To display additional information for each trace, you
need to define a different trace level.
6. In the command line of the Donkey-COM window, type level-g and press
Enter .
The application acknowledges your command and the information will
start downloading to the LOG file.
7. When the downloading process is complete, save the LOG file by
clicking
Save Log File on the File menu, or by selecting the Save icon
. All information that will be displayed in the IP Terminal window
from this point on will not be saved to a file unless a new LOG file is
created.
8. Repeat steps 2 to 5 and 7 to capture any new trace without closing the
application.
Step 6 should only be performed once.
Level-g is the most common level used to capture traces. The system does allow
for trace capturing using different level commands, but is intended for internal
purposes only.