Polycom MGC Administrator, Administrator'S Manual

Page: 316 / 584

Chapter 5 - MCU System Management
5-80
• NET_PSTN_DELAY3 = 0
Delay in hsync (10ms) before the 3rd command
• NET_PSTN_CMD_ORDER = 0
1 - the old order (alert, connect, TS)
0 - new order (TS, alert, connect)
Section GREET_AND_GUIDE\IVR
• MESSAGE = YES
Set to YES, to enable the Message I/O daughter card. For more
information see, the MGC Hardware & Installation Manual, Greet &
Guide Hardware Kit.
•
MUSIC = NO
Set to YES, to enable the Music I/O card. For more information see, the
MGC Hardware & Installation Manual, Input/Output Cards.
•
LEADER_RECOVERY_TIME = 60
A time-out measured in seconds after which the system terminates a
conference when the chairperson leaves. The time-out enables the
chairperson to re-connect prior to conference termination.
nd enable directly logging in to the conference.
•
DTMF_FORWARDING = YES
Set to YES to enable a roll over feature where DTMF codes are
forwarded between one conference to another.
•
TCS4_INFO = NO
Set to YES to allow the field in the video ISDN end points to be
configured as the Numeric ID/Chairperson password and enable direct
logging in to the conference.
• Q&A=YES
When enabled provides the Q&A feature for conferences (audio only).
• DEFAULT_PASSWORD_LENGTH = 6
Value for the default password setting. Valid values 1-16.
• MAX_PASSWORD_LENGTH = 16
The MCU does not accept reservations with passwords longer than the
above value (through API or DTMF). Valid values 1-16.