Polycom MGC Administrator, Administrator'S Manual

Page: 318 / 584

Chapter 5 - MCU System Management
5-82
Section AUDIO PLUS FLAGS
•
VTX = NO
Set to YES to enable VTX 1000 users to connect to conferences with
wide band resources.
• AUTO_AUDIO_PLUS_LOGGER = NO
Set to YES to enable the Auto AudioPlus Logger. When an AudioPlus
unit failure occurs an AudioPlus log file is automatically created.
• AUTO_AUDIO_PLUS_LOGGER_ON_CARD_STARTUP = YES
Set to YES to enable the Auto AudioPlus Logger On Startup. An
AudioPlus log file is automatically created on each and every system
startup.
•
AUDIO_PLUS_YES_NO = YES
Set to YES to enable Audio Plus in the MCU configuration.
•
AUDIO_PLUS_FREQUENCY = MB
A parameter for Time Slot Calculation that determines the Audio
Algorithm bandwidth settings for the MCU.
— NB - Narrow Band.
—
MB - Medium Band. In this mode, Siren14 audio algorithms in
unavailable.
—
WB - Wide Band. In this mode, Siren14 audio algorithm is
available. It decreases the number of audio ports per MCU when set
to this mode.
In order to enable SIREN14 - this flag should be set to WB, with the
SIREN14 and PDC_MODE Flag set to YES. When setting this flag to
WB, for all standard Audio boards (not Audio+) the MCU activates a
system alarm - Major.
• PDC_MODE = YES
If YES, enables SIREN14 on the system.
• MAXIMUM_AUDIO_PLUS_UNITS_NUMBER = 126
Set this value to 126 for the MGC-100, 84 for the MGC-50 as an internal
parameter for time slot calculation.
Enter 0 to disable this parameter.