Polycom MGC Administrator, Administrator'S Manual

Page: 321 / 584

MGC Administrator’s Guide
5-85
with any H.320 participant you are required to set the Chair Control
parameter to Auto in order to activate the feature.
•
CP_4CIF = YES
YES - Depending on the call rate endpoint resolution and layout type, the
encoder transmits in H.263 4CIF.
NO - The encoder does not transmit H.263 4CIF.
• 4CIF_THRESHOLD = 512
Possible values - All natural numbers not greater than 1920. This
parameter is minimal endpoint call rate in Kbps, whenever possible the
encoder transmits H.263 4CIF format.
•
CP_HIGH_RES_GRAPHICS = YES
YES - Enables the support of high resolutions (XGA/SVGA/4CIF/VGA)
in CP, COP or Transcoding conferences on the Video+ card.
Section PEOPLE PLUS CONTENT
•
PEOPLE_AND_CONTENT = YES
Enables People and Content V0 for PictureTel endpoints.
•
ENTERPRISE_PEOPLE_CONTENT = YES
Enables Content for Polycom and iPower endpoints.
•
ENABLE_IP_DUO_VIDEO = YES
Enables an IP based Duo Video conference.
•
ENABLE_DUO_VIDEO = YES
Enables a Duo Video conference.
•
ENABLE_VISUAL_CONCERT_PC = YES
Enables the connection of Polycom Visual Concert PC endpoints using
both Video and Content streams.
•
ENABLE_VISUAL_CONCERT_FX = YES
Enables the connection of Polycom Visual Concert FX endpoint using
both content and video streams.
• CUSTOM_FORMATS_IN_H323_DUO_VIDEO = NO
Set to YES to enable the custom format of Tandberg H323 Duo Video
participants.