Polycom MGC Administrator, Administrator'S Manual

Page: 167 / 584

MGC Administrator’s Guide
3-117
This dialog box is used to define the properties of the ATM network, and
UNI address of the V-Gate. These properties should be obtained from
your service provider.
6. Click the Plus button in the V-Gate UNI Address pane.
The UNI Address dialog box opens.
7. Enter the V-Gate’s UNI Address.
Usually, the first number and the last six numbers in the UNI address are
modified.
The V-Gate UNI Address is defined by the operator. It stores the address
book of the endpoints UNI Addresses.
8. Click OK . The UNI address is added to the V-Gate UNI Number list
Up to six V-Gates may be defined in the system. The order in which the
V-Gates are defined determines the order in which they will be addressed
by the MGC unit when searching for the UNI Address of endpoints.
To define additional V-Gates, repeat steps 7 and 8.
To delete a UNI Number from the UNI number list, select the desired
number, and then click the Minus button in the V-Gate UNI Address
pane.
A confirmation dialog box is displayed.
Select Yes to confirm or No to cancel.