Polycom MGC Administrator, Administrator'S Manual

Page: 311 / 584

MGC Administrator’s Guide
5-75
Section
IP_BOARD_PARAMETERS
•
H245_TUNNELING = NO
Enables H.245 tunneling.
•
JITTER_BUF_SIZE = 2
The size of the minimum Jitter Buffer in 10 msec increments.
The possible values are 2-8 (20-80msecs).
•
SIP_NORTEL = NO
This flag enables/disables specific changes done for the Nortel
environment. (YES for Nortel Environment)
• SIP_VIDEO_DRAFT = 5
The SIP Video draft version. ‘5’ is the newer one. (3 for Nortel
Environment)
• SIP_CAP_DTMF_BY_INFO = NO
If YES, offer signaling DTMF in SDP.
• FILTER_MEDIA_BY_IP = YES
If set to YES, we drop packets that don’t come from the address specified
when the channel was opened. For Cisco this flag should be set to NO.
Section
IP_3G_FLAGS
• ENABLE_H323_PSTN = NO
YES - Enable Ericsson 3G support
NO - Disable Ericsson 3G support
• USE_ISDN_NUMBER_FOR_H323_DIALING = NO
YES - Uses an ISDN number for H.323 dialing.
NO - An ISDN number is not used for H.323 dialing.
•
H323_MOBILE_PHONE_RATE = 0
Available values 0 - 128.
52 is for Ericsson only.
•
SEARCH_FOR_H323_DEFINED_PARTY = YES
YES - Enables an MCU search for define participant.
NO - The MCU does not search for defined participant.