Polycom MGC Administrator, Administrator'S Manual

Page: 236 / 584

Chapter 4 - MCU Card Management
4-54
Table 4-13: Automatic and Manual Reset Options
Process Method Initiated from Flag/Card Settings
Reset Unit
• Manual
Reset
MGC Manager Manual Card reset by right-
clicking the unit and selecting
Reset Unit .
Reset Unit •
Manual
Reset
IP Terminal Manual Card reset command
(card_reset<Board_Id><Unit_Id>)
sent from the IP Terminal to the
MCU.
IP Self
Recovery
(enabled) •
Auto
Reset
MCMS
Request Implemented in the RTP
processor (component failure).
Initiated if the “system.cfg” flags in
the CARDS section are
configured as follows:
RTP_SELF_RECOVERY=YES
RESET_UNIT=NO
IP Self
Recovery
(disabled)
• Auto
Reset
MCU (Card
Manager) Implemented in the RTP
processor (component failure).
Initiated if the “system.cfg” flags in
the CARDS section are
configured as follows:
RTP_SELF_RECOVERY=NO
RESET_UNIT=YES
Video+ Self
Recovery
(enabled) •
Auto
Reset
MCMS
Request Implemented in the RTP
processor (component failure).
Initiated if the “system.cfg” flags in
the CARDS section are
configured as follows:
MAP_SELF_RECOVERY=YES
RESET_UNIT=NO
Video+ Self
Recovery
(disabled)
• Auto
Reset
MCU (Card
Manager) Implemented in the RTP
processor (component failure).
Initiated if “the system.cfg” flags in
the CARDS section are
configured as follows:
MAP_SELF_RECOVERY=NO
RESET_UNIT=YES