Polycom MGC Administrator, Administrator'S Manual

Page: 402 / 584

Chapter 6 - Defining Operators
6-6
Changing an Operator’s Password
A Superuser operator can change his/her own password and other operators’
passwords. An Ordinary operator can change his/her own password.
To change an operator’s password:
1. Double-click the Operators icon or click on the plus [+] icon next to the
Connections icon.
A list of participants appears below the Operators icon. All operators
currently connected to this MCU appear in the list.
2. Right-click the name of the operator to be deleted, and then click
Change Password .
The Change Password dialog box appears.
3. In the New text box, type the new operator’s password. The operator uses
this password when logging into the system.
Enable the “system.cfg flag” in the UTIL PASSWORD section
ALLOW_ORDINARY_OPERATOR_TO_CHANGE_ITS_OWN_PASSWORD =
YES prior to changing an Operators password. For more information, refer to
Chapter 5, “Edit “system.cfg”” on page 5-60.