Polycom MGC Administrator, Administrator'S Manual

Page: 101 / 584

MGC Administrator’s Guide
3-51
3. Click one of the following options to set up the clock source for the
system.
After setting the clock source, a Warning message box opens, instructing
you to reset your MCU.
The configuration changes take effect only after the next MCU reset or
start up, and they are shown in the
Configured Clock column in the Status
pane.
Table 3-12: Net-2/Net-4/Net-8 Unit Configuration Options
Option Description
Set as Primary
Clock Source Sets this unit as the primary clock source. For
further information, see Chapter 5, “Clocking” on
page 5-132.
Cancel Primary
Clock Source Stops this unit from acting as the primary clock
source. For further information, see Chapter 5,
“Clocking” on page 5-132.
Set As Backup
Clock Source Sets this unit as the backup clock source. For
further information, see Chapter 5, “Clocking” on
page 5-132.
Cancel Backup
Clock Source Stops this unit from acting as the backup clock
source. For further information, see Chapter 5,
“Clocking” on page 5-132.