Quantum and Evolution Series Installation and Operating Handbook
6-9
Feature SAF
Code
Description
Web acceleration
WEB
Enables accelerated browsing using HTTP
(requires the modem to be fitted with a P3714 IP
traffic card).
Sequential FEC
SEQ
Enables Sequential FEC up to a maximum of
2Mbps.
Wideband L-band
WRF
Enables selection of additional L-band
frequencies between 1950MHz and 2050MHz.
IP terrestrial
IPT
Enables IP Terrestrial base modem interface for
PD10 Modem
G.703 clock extension
CLK
When enabled provides a high stability G.703
(T1 or E1) timing reference to the distant end of
a satellite link.
LDPC FEC
LDPC5
Enables LDPC FEC scheme to a maximum
data rate of 5Mbps.
LDPC FEC
LDPC10
Enables LDPC FEC scheme to a maximum
data rate of 10Mbps.
LDPC FEC
LDPC25
Enables LDPC FEC scheme to a maximum
data rate of 25Mbps.
LDPC FEC
LDPC55
Enables LDPC FEC scheme to a maximum
data rate of 55Mbps (Evolution PD55) or
60Mbps (Quantum PD60).
Adaptive signal pre-
distorter
ASP
Allows 16QAM constellations to be adaptively
predistorted to counter the effects of nonlinear
distortion in the communications path. Requires
modem hardware above a certain revision
number – please contact Customer Technical
Support for details.
Dynamic routing
RTG
Enables choice of RIP, OSPF and BGP dynamic
routing.
DVB-S2 Tx
DVB2T
Enables DVB-S2 Tx operation (includes
SmartLink).
DVB-S2 Rx
DVB2R
Enables DVB-S2 Rx operation (includes
SmartLink).
DVB IP
DVBIP
Enables MPE, ULE and (Paradise proprietary)
PXE DVB over IP encapsulation (requires P3714
IP Traffic card). Quantum modems only.
VCM (Quantum
modems only)
VCM DVB-S2
Variable
Coding and Modulation mode,
allowing each stream in point-to-multipoint IP with
a shared outbound carrier to use a different
modulation and FEC rate, specific to each remote
modem.
Software Activated Features (continued)
