Quantum and Evolution Series Installation and Operating Handbook
7-71
•
1-for-1.
This controls whether BUC services (i.e. DC supply and 10MHz reference)
stay with the on-line modem or switch to the standby modem when a 1-for-1
switchover occurs in a 1-for-1 redundant pair of modems. Note that FSK
communications will always be switched over.
Edit-Tx-Carrier-Advanced-BUC Power Offset Screen
Units:
dBm/dBw
Minimum value:
-99
Maximum value:
+99
Step size:
0.1dB
Factory default:
0
Description:
This screen allows the modem to display and the user to edit the final
SHF power instead of the IF carrier level. Use the up/down arrows to
change the sign. Once set, the user is navigated to the Tx power units
selection screen.
Edit-Tx-Carrier-Advanced-BUC Power Units Screen
This allows the user to set the modem to display and edit the Tx carrier level in terms of
either the Tx Power or EIRP, measured in dBm or dBW.
Tx power offset: -99.9 to 99.9dB
[-00.0] Step 0.1dB
New: -00.0
Tx power units: [dBm]
1: dBm
2: dBw
