Quantum and Evolution Series Installation and Operating Handbook
7-118
Edit-Unit-Interface-Terrestrial-Enable Default RIP Configuration
Options:
Use RIP enabled default
Turns on the RIP dynamic routing protocol by setting a default configuration
that will be sufficient in most cases. The configuration can be further tuned,
if required, as specified in the TCP/IP white paper at
http://www.paradisedata.com//whitepapers.php
.
Disable RIP
The RIP dynamic routing protocol is turned off. Note: this will overwrite any
existing configuration, including any modified as specified above (see the
TCP/IP white paper at
http://www.paradisedata.com//whitepapers.php
for
more details).
Factory
default:
Disable RIP
Description:
This option is available in routing mode.
Edit-Unit-Interface-Terrestrial-IP QOS Scheme
Options:
Off
In this mode, no prioritization is made between different IP packets entering
or leaving the modem.
On
In this mode, the modem implements IEEE 802.1p packet prioritization.
This allows for 8 classes of data to be specified as part of a 3-bit field within
Enable default RIP configuration:
[Disable RIP]
New:[Disable RIP]
Weighted QoS:[Off]
1:Off
2:On
