Quantum and Evolution Series Installation and Operating Handbook
7-123
Description:
Sets the IP traffic gateway for the satellite interface when the modem is
in routing mode.
Edit-Unit-Interface-Terrestrial-IP VLAN Filtering Screen
Options:
Off
In this mode, VLAN tags are not generated or removed by the modem. This
means that no filtering of traffic based on VLAN id takes place. Since each
remote modem receives the same broadcast traffic, a device such as a
router must be present to filter out any traffic that is intended only for other
remote modems.
On
In this mode, each remote modem can be assigned a VLAN id which is
used by the Hub to tag each packet destined for any device attached to a
network off that particular remote modem. The tags are added by the Hub
Tx modem and removed by the remote modem. The remote modem uses
the tag to filter out unwanted data that has been broadcast indiscriminately
to all remote modems.
Factory
default:
Off
Description:
Controls whether VLAN tags are being used to implement point-to-
multipoint filtering of traffic at remote modems to filter out unwanted
broadcast traffic. This option is only available in Hub and Remote
Ethernet traffic modes (since it is only used in point-to-multipoint mode
where there is a direct return path).
Enable VLAN filtering:[Off]
1:Off
2:On
