Quantum and Evolution Series Installation and Operating Handbook
7-106
Units:
ms
Minimum value:
000.00
Maximum value:
300.00
Step size:
0.01
Factory default:
000.00
Description:
The maximum satellite round trip delay. This value directly affects the
modem acquisition time. Once Paired Carrier is working, in order to
minimize the acquisition time, it is recommended to use the actual
measured satellite delay value shown on the
Status-PCMA
screen and
set the maximum delay to this value plus 0.5ms.
Edit-Rx Rx=Tx Screen
Factory default:
Off
Description:
Controls whether specific Rx configuration parameters mirror the
equivalent Tx parameters. Exceptions include the IF frequency, spectral
inversion, clocking and timeslots, as well as parameters that have no Tx
equivalent, such as buffer size and sweep control. This feature can be
used to simplify the configuration for duplex links. When switched off, the
Rx configuration retains its values and does not return to the values prior
to tracking being switched on.
7.3.3.2.9 Edit-Rx-Interface Menu
See the description of the transmit path equivalent. This allows independent selection of
the operating mode of the Rx path of each port of the Sat-ABIS and Quad E1 cards,
including setting up timeslots. For Sat-ABIS, this menu allows each timeslot, and portions
of each timeslot, to be allocated to voice and signaling, allowing the appropriate
compression techniques to be used for each. For Quad E1, this menu additionally
Max delay: 0 to 300ms
[000.00] Step 0.01ms
New: 000.00
Rx values track Tx: [Off]
1:Off
2:On
