Panasonic KX-TVP50E Installation Manual Download Page 193

Page: 193 / 368

SYSTEM ADMINISTRATOR'S GUIDE

Installation Manual

193

Mailbox
Capacity
Maximum
Message
Time

5-100 min

(10)

Specifies the total number of available minutes in each
mailbox for message storage (both new and saved
messages).

Message
Retrieval
Order

1. LIFO
2. FIFO

(LIFO)

Specifies the order in which messages are retrieved
(played back for listening).

1. LIFO - Messages are retrieved starting with the most

recent.

2. FIFO - Messages are retrieved starting with the oldest

message.

Message
Scanning with
Information

1. Yes
2. No

(No)

If set to "Yes," the VPS adds the message sender's
information, recording date, and time to the message
during message scan.

Play System
Prompt after
Personal
Greeting

1. Yes
2. No

(No)

If set to "Yes," directions for recording a message are
given to the caller directly after the personal greeting has
been played.

The following guidance messages are played:
[668]

"To end recording, hang up or press 1 for more

features."

[702]

"To pause and restart recording, press 2."

Use Call
Waiting
on Busy

1. Yes
2. No

(No)

If set to "Yes," the VPS signals the busy extension that
another call is waiting.

Table 38

Parameter

Value Range

(Default)

Description/Function

Summary of Contents for KX-TVP50E

















































































































































































































































































































































































Search results

Summary of Contents for KX-TVP50E

Reviews:

Related manuals for KX-TVP50E

Brands by name

Popular brands

Panasonic KX-TVP50E, Installation Manual

Search results

Summary of Contents for KX-TVP50E

Reviews:

Related manuals for KX-TVP50E

Brands by name

Popular brands