Panasonic KX-TVP50E, Installation Manual

Page: 234 / 368

SYSTEM ADMINISTRATOR'S GUIDE
234 Installation Manual
Other Parameters - Message Waiting Notification
The following parameters are used to control the handling of message waiting notification
calls.
Outgoing Call
Setup
Sequence Up to 12 digits
consisting of
0-9, , #, F, R, S, T,
W
(T)
Specifies the sequence of codes used by the VPS when
calling an exchange line. Up to 12 digits can be set.
The default value is "T." "T" indicates that the system
will dial the outside phone number only after detecting
a dial tone.
Example:
9W = (9) - 1-s wait - dial outside phone number. "9" is
the exchange line access number.
F: Flash (Recall)
R: Ringback Tone Detection
S: Silence Detection
T: Dial Tone Detection
W: Wait for 1 s
1-9, 0, , #: Dial Codes
To select the Message Waiting Notification Parameter, follow the menu path as
shown:
System Administration Top Menu - 1 - 5 - 7 - 3
Table 61
Parameter Value Range
(Default)
Description/Function
Outgoing Call
Ports Port No.
(1, 2)
Specifies the port numbers used for the Message Waiting
Notification Device feature. The VPS makes outgoing
calls using the port specified in this field. At least 1 port
must be specified.
Table 60
Parameter Value Range
(Default)
Description/Function