Panasonic KX-TVP50E, Installation Manual

Page: 98 / 368

CUSTOMISING THE SYSTEM
98 Installation Manual
To light Message Waiting Lamp at Operator 1's extension: Assign Mailbox 998 to
Operator 1's extension. This will notify Operator 1 of messages left in the GDM.
Operators 2 and 3:
For KX-TD816, KX-TD1232 and KX-TD612, Operators 2 and 3 can be assigned to a
floating number that is assigned to a ring group.
Return to Program - Service Settings - Auto. Attn. Setting Menu:
Enter the data using the table below as a guide. The table below is for Operator 1 as an
example. Please refer to it for Operators 2 and 3.
Table 22
Description Value Range
(Default)
Description/Function
Operator
Service
1. Disable
2. Enable
(Enable)
Enables or disables the Operator Service feature.
[Note]
• All non-touchtone input calls in Automated
Attendant Service will be transferred to the
General Delivery Mailbox when the Operator
Service is disabled.
Operator's
Extension
1-5 Digits
(0)
Specifies the extension number for Operator 1.
[Notes]
• The default setting (0) cannot be used with the
Message Waiting Notification—Lamp feature
and the Remote Call Forwarding Set feature.
When using these features, you must assign the
extension number that is included in the
Extension Numbering Plan.
• The extension number must not be assigned
anywhere else (in particular, the extension must
not have a mailbox). Otherwise, you will get an
error message.
nter The Number : = 2
rogram - Service Settings - Auto. Attn. Setting - Operator's Parameters Menu
1. Day Mode
2. Night Mode
3. Lunch Mode
4. Break Mode
ELECT ITEM AND PRESS KEY
1. Operator 1
2. Operator 2
3. Operator 3
ELECT ITEM AND PRESS KEY