Panasonic KX-TVP50E Installation Manual Download Page 258

Page: 258 / 368

SYSTEM MANAGER'S GUIDE

258

Installation Manual

SETTING COS (CLASS OF SERVICE)

PARAMETERS

Class of Service defines the set of VPS services available to Subscribers. A maximum of 64
Class of Services can be established. Each Class of Service can be set using the telephone. COS
No. 63 and No. 64 are assigned to the Message Manager and the System Manager respectively.
For a complete explanation of COS parameters, please see Table 38 and T able 39 in Appendix
B3

SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE)

PARAMETERS.

The Class of Service parameters listed below are set by following the procedure steps listed:

•

Personal Greeting Length - Length ranges from 8-60 s in 4 s increment.

•

New Message Retention Time - Maximum time is 30 days.

•

Saved Message Retention Time - Up to 30 days/0: Unlimited.

•

Message Length - Length ranges from 1-6 min/0: Unlimited.

•

Number of Messages - The number of messages range from 5-100.

•

Total Message Time - Total message time ranges from 5-100 min/0: Unlimite.

•

Message Retrieval Order - Settings are LIFO (last in first out) or FIFO (first in first out).

•

Message Scanning with Information - Settings are enable or disable.

•

Play System Prompt after Personal Greeting Status - Settings are enable or disable.

•

Call Waiting on Busy Status - Settings are enable or disable.

•

Message Cancel for Live Call Screening Status - Settings are enable or disable.

•

Direct Mailbox Access Status - Settings are enable or disable.

•

Intercom Paging Group Number - 1-9

•

Subscriber Service Prompt Mode

1. System Prompt
2. User 1 Prompt
3. User 2 Prompt

•

Remote Call Forward to CO—Settings are enable or disable.

•

Delete Message Confirmation—Settings are enable or disable.

•

Number of Caller IDs for Personal Caller Name Announcement - 0-30

•

Play Personal Greeting for Caller ID - Settings are enable or disable

•

Caller ID Screening - Settings are enable or disable

•

Message Notification Status - Settings are enable or disable

•

External Message Delivery Status - Settings are enable or disable

•

Auto Forwarding Status - Settings are enable or disable

Not available for COS No.63 (Message Manager) and COS No.64 (System Manager)

Not available for COS No.64 (System Manager)

Summary of Contents for KX-TVP50E

















































































































































































































































































































































































Search results

Summary of Contents for KX-TVP50E

Reviews:

Related manuals for KX-TVP50E

Brands by name

Popular brands

Panasonic KX-TVP50E, Installation Manual

Search results

Summary of Contents for KX-TVP50E

Reviews:

Related manuals for KX-TVP50E

Brands by name

Popular brands