Panasonic KX-TVP50E, Installation Manual

Page: 240 / 368

SYSTEM ADMINISTRATOR'S GUIDE
240 Installation Manual
Other Parameters - Fax Management
The VPS can be programmed to automatically transfer incoming fax calls to a fax extension.
A maximum of 2 fax extensions can be specified as the destination for the Automatic Fax
Transfer. If the main fax extension is not available to receive a fax, the VPS will transfer the
fax transmission to the alternate fax extension.
Paging Code
for Group 1-8 Up to 12 digits
consisting of
0-9, ,# for each
group
(Group 1-8: 331-
338
(for KX-TA series)
or
6301-6308
(for KX-TD816/
1232)
All Groups
(Group 9): 33
(for KX-TA series)
or
63 (for KX-
TD816/1232))
Specifies the intercom paging access code required by
the PBX.
Note
: The Intercom Paging Group Number available
for each Subscriber is determined on a COS-by-COS
basis.
Paging Code
for All Groups
To select Fax Management, follow the menu path as shown:
System Administration Top Menu - 1 - 5 - 7 - 8
Table 66
Parameter Value Range
(Default)
Description/Function
Automatic
Transfer of
Incoming Fax
Call 1: Disable
2: Enable
(Disable)
Used to enable or disable the Automatic Transfer of
Incoming Fax Call Service.
Note : Automatic detection works for only the first 30s.
Table 65
Parameter Value Range
(Default)
Description/Function