Panasonic KX-TVP50E, Installation Manual

Page: 55 / 368

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBX
Installation Manual 55
The KX-TVP50 System comes from the factory already set up for a KX-TA series PBX. When
the power is turned on for the first time, the VPS will try to communicate with the KX-TA
series PBX through Digital Integration. For this reason, several things should be done before
operating for the first time.
Note
Depending on the model and/or the software version of the connected PBX (see 3.1.1 APT/
DPT or Inband Signalling? ), you may not be able to utilise some of the features listed above.
For more information, consult your dealer.
Intercom Paging* Callers can page subscribers through built-in speakers
and external paging equipment. For a Caller ID Caller,
if his name has been recorded for the Caller Name
Announcement feature, the name will be announced at
the end of the page.
Caller Name Announcement
(System/Personal)* A pre-recorded announcement of the Caller ID callers'
name is heard when extension users listen to messages
left in their mailbox and/or calls are transferred from
the VPS to the users.
Caller ID Call Routing* The VPS automatically sends calls from pre-assigned
Caller ID numbers to the desired extension, mailbox
or Custom Service.
Personal Greeting for Caller ID* Each subscriber can record up to 4 personal greeting
messages for special callers.
* Caller ID Note 1: When an incoming outside call reaches the VPS via the PBX,
the VPS will wait about 2 rings before answering the call to receive the Caller
ID information properly from the PBX.
This waiting time can be changed by using the WCID command (see
7.2.20
Wait for Caller ID (WCID) in 7.2 UTILITY COMMANDS).
Caller ID Note 2:
In the documentation for the KX-TD816/1232 series PBX,
the Caller ID feature is called CLIP (Calling Line Identification Presentation).
Table 13
DIGITAL INTEGRATION FEATURES