Panasonic KX-TVP50E, Installation Manual

Page: 46 / 368

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
46 Installation Manual
3.2.4 PBX Interface Parameters
Dialing Parameters
• PBX Type:
Specifies the type of PBX which is connected to the VPS.
•
Integration Mode:
Specifies the method of integration to be used between the VPS and PBX. APT Integration
is only available when a KX-TA series PBX is connected and the software is upgraded. DPT
Integration is only available when a KX-TD series PBX is connected and the software is
upgraded.
• Operator Transfer Sequence:
Tells the VPS how to transfer a call to the operator.
Example: FTX [recall—dial tone—dial (operator) extn.]
• Extension Transfer Sequence:
Tells the VPS how to transfer a call to an extension.
Example: FTX [recall—dial tone—dial extn.]
•
Alternate Extension (Transfer Sequence):
Tells the VPS how to transfer a call to an extension that is entered into the "Alternate
Extension Group." This is useful for extensions that need a special transfer procedure (i.e.,
blind transfer) such as modem extensions.
Example:
FTXD [recall—dial tone—dial extn.—hang up]
• Reconnect Sequence on Busy:
Tells the VPS how to return to the caller if the extension the caller has dialled is busy. PBXs
differ in how they handle this function. Test from an SLT to determine the sequence.
• Reconnect Sequence on No Answer:
Tells the VPS how to return to the caller if the extension the caller has dialled does not
answer. PBXs differ in how they handle this function. Test from an SLT to determine the
sequence.
Table 10
SEQUENCE CODES
D Disconnect
F Flash (Recall)
R Ring Detection
S Silence Detection
T Dialtone Detection
W Wait for 1 Second
X Dial Extension
A: Answer
0-9, , #
Touchtone Digits