Panasonic KX-TVP50E Installation Manual Download Page 295

Page: 295 / 368

MESSAGE MANAGER'S GUIDE

Installation Manual

295

The VPS plays the Caller ID number and its name. To change the name,

Press [1]

. If a name

has not yet been recorded for this Caller ID number, go to Step 6.

Note

•

Press [2] to accept the current name. - Return to Step 4.

•

Press [3] to erase the current name. - Return to Step 4.

Record the name at the tone and

Press [1]

The VPS plays the recorded name.

Press [2]

to accept it.

Note

•

Press [1] to change the recorded name. - Return to Step 6.

•

Press [3] to erase the recorded name. - Return to Step 4.

Record names for other Caller ID List numbers by repeating Steps 4-7.

Summary of Contents for KX-TVP50E

















































































































































































































































































































































































Search results

Summary of Contents for KX-TVP50E

Reviews:

Brands by name

Popular brands

Panasonic KX-TVP50E, Installation Manual

Search results

Summary of Contents for KX-TVP50E

Reviews:

Brands by name

Popular brands