Panasonic KX-TVP50E, Installation Manual

Page: 232 / 368

SYSTEM ADMINISTRATOR'S GUIDE
232 Installation Manual
Table 59
Parameter Value Range
(Default)
Description/Function
Numbering
Plan
1-16 2-5 digits
consisting
of 0-9, X
(Numbering
Plan
1:2 XX
Numbering Plan
2:3 XX
Numbering Plan
3-16: None)
Specifies the first 1 or 2 digits of the PBX extension
numbers. Up to 16 entries can be added to the list. Each
entry can contain 2-5 digits of numeric characters, "0-9",
and "X" which matches any digit. Extension numbers
cannot begin with "0."
Examples:
a) If valid PBX extension numbers are to be specified 201
through 264 and 301 through 364, specify the numbers
as follows:
2XX: Indicates any 3-digit extension number starting
with "2."
3XX: Indicates any 3-digit extension number starting
with "3."
b) If valid PBX extension numbers are to be specified 400
through 450 and 3300 through 3399, specify the
numbers as follows:
4XX: Indicates any 3-digit extension number starting
with "4."
33XX: Indicates any 4-digit extension starting with
"33."
Note:
Auto Configuration will set this parameter automatically.
The Automated Attendant will dial any 2-5 digit PBX
extension number (except numbers beginning with "0")
whether valid or not. If the dialled number is included in the
numbering plan, the Automated Attendant will
immediately send it to the PBX without waiting for further
input. If not included in the plan, the Automated Attendant
will wait until the dialled number is recognised as an
extension number, the internal inter-digit timer expires, or
the caller dials 5 digits.
If the number for an outgoing call is not found on the
Numbering Plan, the VPS will consider it an outside
number. The VPS will then attempt to dial it using the
"Outgoing Call Setup Sequence."