Panasonic KX-TVP50E, Installation Manual

Page: 155 / 368

SYSTEM FEATURES
Installation Manual 155
Calling a Beeper
(Pager) Allows a subscriber to be notified by a beeper
(pager) when he has message(s). If the beeper
(pager) has a display, it is possible to send to
it a callback number. The callback number
can be recorded when a caller leaves a
message. If the caller does not leave a
callback number, the System Callback No., or
the caller's number if it is received through a
telephone company's Caller ID service, will
be sent instead.
To utilise this feature, follow the procedure
below.
1)
Go to the System Administration Top Menu,
and type 1-2 (Program-Class of Service) and
COS No.(1-63).
Select "Yes" in the Authorization for Message
Notification parameter. Make 1 selection
from the available options in the Beeper
Callback No. Entry Mode parameter.
2)
From the System Administration Top Menu,
type 1-1-1-Mailbox No.-Y-2-Device No.(1-3)
(Program-Mailbox Setting-Enter/Edit-
Mailbox No. Entry-Do you want to edit this
mailbox?-Notification Setting-Device No.
Entry).
For the Dial Number parameter: enter your
PBX's line access code before the beeper
(pager) number for dialling outward; enter an
X after the beeper (pager) number. (The X is
for the caller to enter his number as the
callback number which will later appear on
your beeper (pager).) Finally, select "Beeper"
in the Type of Device parameter.
• See "Dial Number" and "Type of
Device" in Table 36 in
B2
SYSTEM
ADMINISTRATION -
MAILBOXES.
• See "Authorization for Message
Notification" and "Beeper
Callback No. Entry Mode" in
Tables 38 and 39 in
B3
SYSTEM
ADMINISTRATION -
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
• See "System Callback Number"
in Table 61 in B6.7
Other
Parameters.
• See C3 SETTING COS
(CLASS OF SERVICE)
PARAMETERS.
Table 32
FEATURE DESCRIPTION REFERENCES