Panasonic KX-TVP50E, Installation Manual

Page: 129 / 368

SYSTEM MAINTENANCE AND TROUBLESHOOTING
Installation Manual 129
7.2.12 Custom Service Menu Access Count Clear (CCLR)
Each Custom Service has an access counter that counts the number of times the service has
been accessed. This command clears this counter.
Type CCLR, Press Space, and Enter Custom Service Menu (1-100), then Press RETURN .
Note
Type CCLR 0 to clear the access counters of all Custom Services.
7.2.13 Message Waiting Lamp Retry Times (MWL)
This command is used to specify the number of times the VPS will attempt to turn on the
Message Waiting Lamp of the called extension. This setting is required when a PBX other than
the Panasonic KX-T series telephone system is used.
Note
This setting is not valid if "Message Waiting Lamp for Every Message" is set to "Yes."
Access: 9: Indicates that this Custom Service was accessed 9 times
by callers. This counter can be cleared. See
7.2.12
Custom Service Menu Access Count Clear
(CCLR).
Menu Msg. :None: Indicates that the menu message for this Custom Service
is "None (not recorded)". If menu message is recorded,
"Rec" will appear.
[N]-Xfer Mbx (998): Caller will be sent to General Delivery Mailbox (GDM)
if he dials nothing.
[1]-Custom [1]: Custom Service 1 will play when the "1" key is pressed.
[2]-Custom [2]: Custom Service 2 will play when the "2" key is pressed.
[3]-Custom [3]: Custom Service 3 will play when the "3" key is pressed.
[4]-Dept Dial: Department Dialling menu will play when the "4" is
pressed.
$ CCLR 20
Custom Menu <20> Access Counter Cleared !!
$ MWL
Current Setting of M.W.L. Retry Count is 1
Enter M.W.L. Retry Count (1-3) =