Panasonic KX-TPA73 Operating Instructions Manual Download Page 47

Page: 47 / 161

2.4.6 Menu List (KX-TPA70/KX-TPA73)

Press

or the [CENTER] navigation key to display the menus. Press [ ]/[ ] to select

Menu List item, press [ ]/[ ]/

to access the next page.

While in Standby Mode

Call History (page 50)

Displays the Call History.

Contacts (page 84)

Opens the Contacts.

Intercom (page 61)

Enters an Intercom Call.

Call Service (page 106)

Accesses the call handling service setting.

Status (page 106)

Accesses the status of base unit/handset/Line information.

Phone Settings (page 104)

Accesses the "Phone Settings".

System Settings (page 105)

Accesses the "System Settings".

While in Off-hook/During a Conversation

Call History (page 50)

Displays the Call History.

Contacts (page 84)

Opens the Contacts.

Intercom (page 61)

Enters an Intercom Call.

Mute (page 77)

Turns the microphone mute feature on or off during conversation.

Noise Reduction (page 71)

Turn the noise reduction feature on or off.

2.4.6 Menu List (KX-TPA70/KX-TPA73)

Summary of Contents for KX-TPA73


































































































































































Search results

Summary of Contents for KX-TPA73

Reviews:

Related manuals for KX-TPA73

Brands by name

Popular brands

Panasonic KX-TPA73, Operating Instructions Manual

Search results

Summary of Contents for KX-TPA73

Reviews:

Related manuals for KX-TPA73

Brands by name

Popular brands