Panasonic KX-TPA73 Operating Instructions Manual Download Page 102

Page: 102 / 161

Note

• To select the number of seconds before the call is automatically made, see "Hot Key

8.1.3 Memo Alarm Setting

An alarm will sound at the set time. A memo can also be displayed. Memo Alarm is
available only when the handset/desk phone is within range of a base unit.

Note

• You can select the ringer pattern for each Memo Alarm. For details, see Incoming

Option, page 129.

• If you are on a call at the time that the alarm is set to sound, it will sound after you have

ended the call.

Setting a Memo Alarm

[In standby mode]

/[CENTER]

[ ]/[ ]: "Call Service"

/[CENTER]

[ ]/[ ]: "Memo Alarm"

/[CENTER]/[ ]

[ ]/[ ]: Select an alarm number (1–3).

/[CENTER]/[ ]

[ ]/[ ]: "Mode"

/[CENTER]

[ ]/[ ]: Select an alarm mode.
The alarm modes are as follows:

• Off: Disables the selected Memo Alarm.

• Once: The selected Memo Alarm will occur only once.

• Daily: The selected Memo Alarm will occur at the same time every day.

• Weekly: The selected Memo Alarm will occur at the same time on selected days of

the week.

[ ]/[ ]: "Date (DD-MM-YY)"/"Date (MM-DD-YY)"

/[CENTER]

Set the time and date for the Memo Alarm. The information to enter depends on the
alarm mode.

• Once: Enter the date and time, using the Navigator Keys and/or dial keys.

8.1.3 Memo Alarm Setting

102

Summary of Contents for KX-TPA73


































































































































































Search results

Summary of Contents for KX-TPA73

Reviews:

Related manuals for KX-TPA73

Brands by name

Popular brands

Panasonic KX-TPA73, Operating Instructions Manual

Search results

Summary of Contents for KX-TPA73

Reviews:

Related manuals for KX-TPA73

Brands by name

Popular brands