Panasonic KX-TPA73 Operating Instructions Manual Download Page 92

Page: 92 / 161

Searching by pressing Dial Keys

You can also search for an item in the contacts by pressing multiple dial keys when the
contacts list is displayed.

Press the dial keys to enter the desired name in accordance with the character
tables. See 10.1.1 Character Mode Table, page 122.

Character Table when searching in the Local Contacts

This table is only available for the dial keys when you search in the Handset Contacts.
For details about the character table for other operations, see 10.1.1 Character Mode
Table, page 122.

Example: To enter "ANNE" in Latin-Upper Mode.

[ ]

Note

• Availability depends on your phone system. Contact your administrator for further

information.

7.2.6 Locking the Local Contacts

You can lock/unlock the contacts while the handset/desk phone is in standby mode. If no
password has been set, you cannot lock the contacts. For details about setting the
password, see 2.8 Setting the Password, page 54.

Locking/Unlocking the Contacts

[In standby mode]

To lock

Press and hold

for more than 2 seconds.

•

will be displayed.

To unlock

Press and hold

for more than 2 seconds.

Enter your password.

To return to standby mode, press

Unlocking the Contacts Temporarily

7.2.6 Locking the Local Contacts

Summary of Contents for KX-TPA73


































































































































































Search results

Summary of Contents for KX-TPA73

Reviews:

Related manuals for KX-TPA73

Brands by name

Popular brands

Panasonic KX-TPA73, Operating Instructions Manual

Search results

Summary of Contents for KX-TPA73

Reviews:

Related manuals for KX-TPA73

Brands by name

Popular brands