Panasonic KX-TPA73, Operating Instructions Manual

Page: 107 / 161

3. [ ]/[ ]: Select the item. /[CENTER]/[ ]
Item
Do Not Disturb Call Forward Memo Alarm Anonymous Call
Block Anonymous Block Caller ID Anywhere Remote Office
Simultaneous Ring
8.1.9 Block Anonymous Calls (when connected to the Panasonic base
unit only)
This feature allows the unit to reject calls when the unit receives a call without phone
number. The default setting is "Off".
IMPORTANT
• We recommend setting with your administrator. Contact your administrator for further
information.
• This feature is not available on shared lines.
[In standby mode]
1. /[CENTER]
2. [ ]/[ ]: "Call Service" /[CENTER]
3. [ ]/[ ]: "Block Anonymous" /[CENTER]/[ ]
4. [ ]/[ ]: Select a desired line. /[CENTER]
8.1.10 Incoming Call Barring (Caller ID service users only)
This feature allows the unit to reject calls from specified phone numbers that you do not
want to answer such as junk calls.
When a call is received, the unit does not ring while the caller is being identified. If the
phone number matches an entry in the call barred list, the unit rejects the call.
Storing unwanted callers (when connected to the Panasonic base unit only)
You can store up to 20 phone numbers per line in the call barred list by using the caller
list or by entering the numbers directly.
[In standby mode]
1. /[CENTER]
2. [ ]/[ ]: "Call Service" /[CENTER]
3. [ ]/[ ]: "Block Caller ID" /[CENTER]/[ ]
8.1.9 Block Anonymous Calls (when connected to the Panasonic base unit only)
107