Panasonic KX-TPA73, Operating Instructions Manual

Page: 80 / 161

6.1 Call Forwarding/Do Not Disturb
You can have incoming calls automatically forwarded to another destination. You can
also have incoming calls rejected (Do Not Disturb).
Note
• Do Not Disturb is available only when connected to a Panasonic base unit.
To access the DND settings
[In standby mode]
1. / ("Do Not Disturb").
2. To change the DND status, press [ ] or [ ] to select check box of desired line.
/[CENTER]
DND: Enable Do Not Disturb *1
(All incoming calls are automatically rejected.)
*1
Only when connected to a Panasonic base unit.
To access the Forward settings
[In standby mode]
1. / ("Call Forward").
2. If the unit has multiple lines, to select the desired line.
[ ]/[ ]: Select the desired line number.
/[CENTER]
or
[ ]/[ ]: Press the desired line number ( - ).
3. [ ]/[ ]: Select the type of Forward. [ ]/ /[CENTER]
The settings are as follows:
• Forward (All): Enable Forward All Calls
(All incoming calls are forwarded.)
• Forward (Busy): Enable Forward Busy
(Incoming calls are forwarded only when your extension is in use.)
• Forward (N/A): Enable Forward No answer
(An incoming call is forwarded if you do not answer the call within a certain
amount of time.)
4. To change the Forward status, press [ ] or [ ] to select "On/Off" /[CENTER]
5. [ ]/[ ]: "Phone Number" /[CENTER]
6. Enter a new forward destination number, or confirm and modify a previously set
forward destination number.
6.1 Call Forwarding/Do Not Disturb
80