Panasonic KX-TPA73, Operating Instructions Manual

Page: 156 / 161

Problem Possible Cause Solution
You cannot use the
handset/desk phone
during a power
failure. The handset/desk phone
will not function during a
power failure because the
base unit stops emitting
radio waves. —
The headset does
not work. A headset tone cannot be
heard when receiving an
incoming call when the
headset is attached. • Make sure the headset
tone setting is set to "On".
See Incoming Option, page
129
• Make sure the headset
jack is connected properly.
See 2.3.2 Handset
(KX-TPA70/KX-TPA73),
page 31
Noise is frequently
heard. Nearby electrical
appliances are causing
interference, or you are
too far from the base unit. • Place the handset/desk
phone and base unit away
from other electrical
appliances.
• Move closer to the base
unit.
Two short beeps are
heard during a
conversation. The radio signal is weak. Move closer to the base unit.
The charge indicator
flashes red rapidly. The charger is not
connected properly. • Make sure the battery is
inserted properly.
• Set the handset in the
charger properly.
• Contact your phone
system dealer/service
provider.
You charged the
batteries for 6
hours, but the beep
tones sound, and
(needs to be
charged) flashes
after a few
telephone calls.
The battery charge
contacts may be dirty. Clean the battery charge
contacts without damaging
them and charge once more.
It is time to change the
batteries. Replace with a new one.
10.1.9 Troubleshooting
156