Panasonic KX-TPA73, Operating Instructions Manual

Page: 118 / 161

• If 4 base units have been registered to a handset/desk phone, "Memory Full" is
displayed on the LCD at step d.
*1
The administrator password may be required for this setting. Contact your
administrator for further information. For available characters, see 10.1.2 Character
Table for Administrator Password, page 124.
Handset/desk phone registration using the handset/desk phone
If operation using the base unit is difficult, or if you want to specify the handset/desk
phone number during registration, you can use a registered handset/desk phone to add
new handsets/desk phones.
Before operating the handset/desk phone, confirm that the STATUS indicator of the base
unit is Green (On/Slow Flashing/Quick Flashing).
1. Registered handset/desk phone:
[In standby mode]
a. /[CENTER]
b. [ ]/[ ]: "System Settings" /[CENTER]
c. [ ]/[ ]: "Base Unit Settings" /[CENTER]/[ ]
d. [ ]/[ ]: "Handset" /[CENTER]/[ ]
e. [ ]/[ ]: "Registration" /[CENTER]/[ ]
f. Select a handset/desk phone. /[CENTER]
The STATUS indicator on the base unit will flash red (slow flashing).
2. Unregistered handset/desk phone:
Follow the procedure from step 2 above with the handset/desk phone you want to
add.
9.4.2 Deregistering a Handset/Desk Phone
A handset/desk phone can cancel its own registration (or the registration of another
handset/desk phone) that is stored to the base unit. This allows the handset/desk phone
to end its wireless connection with the system.
1. Handset/desk phone:
[In standby mode]
a. /[CENTER]
b. [ ]/[ ]: "Phone Settings" /[CENTER]
c. [ ]/[ ]: "System Option" /[CENTER]/[ ]
d. [ ]/[ ]: "De-Register H/S" /[CENTER]/[ ]
9.4.2 Deregistering a Handset/Desk Phone
118