Panasonic KX-TPA73 Operating Instructions Manual Download Page 48

Page: 48 / 161

2.4.7 Function Keys (KX-TPA70/KX-TPA73)

Handset functions can be activated through the display key list.
In standby mode or during a conversation, press

to display the Function Key

list.
The followings are by default, and you can change the key list. The list order may differ
depending on your country/area. For details, see 8.1.4 Changing the Function Keys/
Program Keys, page 103.

Suffix: UK/AL/C/CE

1: Do Not Disturb

(page 80)

Displays and/or sets Do Not Disturb.

2: Call Forward

*1*2

(page 80)

Displays and/or sets Call Forwarding.

3: Conference (page 76)

Establishes a multiple-party conversation.

4: BT On/Off

Sets the BT communication On/Off control.

5: Flash/Recall (page 60)

Disconnects the current call and allows you to make another call without hanging up.

6: Call History (page 50)

Makes a call using the Call History.

7: Call Park

(page 75)

Used to park or retrieve a call in a preset parking zone.

8: Paging

(page 64)

Makes a voice announcement to the handsets simultaneously.

9: Redial (page 61)

Redials the last dialed number.

0: Pause

Pauses when dialing.

: Auto Answer

Answers an incoming call automatically in Hands-free mode.

#: Contacts (page 84)

Makes a call using the Contacts.

USA only (Suffix none)

1: Do Not Disturb

(page 80)

Displays and/or sets Do Not Disturb.

2.4.7 Function Keys (KX-TPA70/KX-TPA73)

Summary of Contents for KX-TPA73


































































































































































Search results

Summary of Contents for KX-TPA73

Reviews:

Related manuals for KX-TPA73

Brands by name

Popular brands

Panasonic KX-TPA73, Operating Instructions Manual

Search results

Summary of Contents for KX-TPA73

Reviews:

Related manuals for KX-TPA73

Brands by name

Popular brands