Panasonic KX-TPA73 Operating Instructions Manual Download Page 43

Page: 43 / 161

• To select a key, press [ ] or [ ] to select the desired key.

• If you press a dial key when displaying the line status, only the limited line is displayed.

• The line name can be changed. Contact your administrator for further information.

Status Indication

Status

Flashing

pattern

Icon

Display and description

Idle

—

"Free"

• The line is idle.

"<n>Free"

• A shared line is idle.

Incoming

Quick
Flashing

Name or telephone number of
the caller.

• A call is being received.

• A call (including one on a

shared line) is being
received.

"Incoming Call"

• A call to another line is

being received.

• The call cannot be

answered. (The call is
being received by another
person or is call waiting.)

Recall

Quick
Flashing

Name or telephone number of
the person on hold.

• A call on hold is recalling.

2.4.4 LINE Key

Summary of Contents for KX-TPA73


































































































































































Search results

Summary of Contents for KX-TPA73

Reviews:

Related manuals for KX-TPA73

Brands by name

Popular brands

Panasonic KX-TPA73, Operating Instructions Manual

Search results

Summary of Contents for KX-TPA73

Reviews:

Related manuals for KX-TPA73

Brands by name

Popular brands