Panasonic KX-TPA73 Operating Instructions Manual Download Page 98

Page: 98 / 161

7.5 Using the Shared Contacts (when connected to the
KX-TGP700 only)

You can refer to the Shared Contacts in addition to the Local Contacts, if the Shared
Contacts is available.

Note

• We recommend setting this feature with your administrator. Contact your

administrator for further information.

7.5.1 Searching for an Item in the Shared Contacts

Searching by Name

You can also search for an item in the contacts by entering a name:

[In standby mode]

/[ ]

[ ]/[ ]: "Shared"

/[CENTER]

[ ]/[ ]: Select the desired type of contacts.

/[CENTER]

Enter the name or the first character(s) of the desired name.

/[ ]

[ ]/[ ]: Select the desired item.

[ ]/[CENTER]

[ ]/[ ]: Select the desired phone number.

7.5 Using the Shared Contacts (when connected to the KX-TGP700 only)

Summary of Contents for KX-TPA73


































































































































































Search results

Summary of Contents for KX-TPA73

Reviews:

Related manuals for KX-TPA73

Brands by name

Popular brands

Panasonic KX-TPA73, Operating Instructions Manual

Search results

Summary of Contents for KX-TPA73

Reviews:

Related manuals for KX-TPA73

Brands by name

Popular brands