Panasonic KX-TPA73 Operating Instructions Manual Download Page 28

Page: 28 / 161

2.3 Location of Controls

2.3.1 Base Unit (KX-TGP700)

In order to maximize the antenna characteristics, set the antenna to 90 degrees with the
main unit as shown below.

90°

Status Indicator

Status

Meaning

Color

Light

pattern

Green

• The base unit is connected to the Internet. The

startup process is complete and you may now
make and receive internet calls.

Slow
Flashing

• The base unit is being used for a call.

• The base unit is downloading data. Do not

disconnect the Ethernet cable or AC adaptor from
the base unit until the STATUS indicator stops
flashing and lights in steady green.

Quick
Flashing

• The resource of base unit (path/DECT session) is

busy.

Red

• When the base unit is turned on, the STATUS

indicator lights in red for about 40 seconds.

Slow
Flashing

• The base unit is registering a handset/desk

phone.

Quick
Flashing

• The base unit is paging handsets/desk phones

(by using the handset locator button).

2.3 Location of Controls

Summary of Contents for KX-TPA73


































































































































































Search results

Summary of Contents for KX-TPA73

Reviews:

Related manuals for KX-TPA73

Brands by name

Popular brands

Panasonic KX-TPA73, Operating Instructions Manual

Search results

Summary of Contents for KX-TPA73

Reviews:

Related manuals for KX-TPA73

Brands by name

Popular brands