Panasonic KX-TPA73, Operating Instructions Manual

Page: 77 / 161

Removing a Party from the Conference (when connected to the Panasonic base unit
only)
During a conference, you can remove other parties from the conference. However, this
operation is available only during conference calls you initiate.
1. During a conference call, press .
2. /
3. Press the dial key, or press [ ] or [ ], and then press to select the LINE
number that corresponds to the party you want to disconnect.
4. /
5. Press the dial key, or press [ ] or [ ], and then press to select the LINE
number that corresponds to the remaining party.
Ending a Conference Call
To go on-hook and end the conference call, press .
5.1.4 Mute
You can disable the microphone or the handset to consult privately with others in the
room while listening to the other party on the phone through the speaker or the handset.
To set/cancel
1.
Note
• When is blinking, Mute is on.
If the soft key is not displayed on the LCD, is displayed on the second line of
the LCD.
• During Mute, even if you switch from/to speakerphone, Mute will continue.
• During Mute, even if you connect/disconnect a headset, Mute will continue.
5.1.5 Call Waiting
During a conversation, if a second call arrives, you will hear a call waiting tone. You can
answer the second call by disconnecting or holding the current call.
This is an optional telephone company service. You can receive a call waiting tone and
the caller’s information. For details, contact your phone system dealer/service provider.
5.1.4 Mute
77