background image

– 1 – 

 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

Precautions of Use           

 
The quality of communication depends on the location and 
environment of the base and the handset. The 

21838

 must be kept 

away from sources of excessive heat (radiators, direct sunlight, etc.) 
and protected against vibrations and dust. Never allow your telephone 
to come into contact with water or other liquids or with aerosols. To 
reduce the risk of interference and optimize reception, take particular 
care to keep it away from the immediate vicinity of windows, large 
metal objects, reinforced concrete, televisions, music centres, halogen 
lamps or heating devices, fluorescent lighting, burglar alarms, 
microwave ovens, computers, etc. 
 
To clean the 

21838

, use a lightly moistened antistatic cloth 

 
Information for DECT product: 
The 

21838 

telephone is compliant with the DECT

TM

* standard. It is 

designed to transmit and receive telephone calls and be connected to 
the public telephone 

Country

 network. 

 
*DECT is a trademark registered by ETSI. 
 
 

Safety                                 

 

In the event of danger, the mains adapter acts as 230V power 
isolating device. It should therefore, as a precaution, be installed 
close to the appliance and be easily accessible. 
If the mains adapter fails, it must be replaced by an identical model. 
 
If not connected to the mains power or if there is a mains power 
failure, installations with cordless handsets will no longer work. You 
will then be unable to make or receive calls in the event of an 
emergency. This is why we recommend that you also have a 

 

Summary of Contents for 21838
















Reviews: