Panasonic GTWIN, Reference Manual

Page: 24 / 297

GTWIN Reference Manual
1.6 GT Configuration
23
Tab Description
Alarm History (see p. 41) Enter settings for the alarm history.
Line Graph (see p. 48) Enter settings for line graphs.
Sound (see p. 51) Enter settings for sounds.
Operation Security (see p. 52) Enter settings for operation security.
GT Link (see p. 53) Enter settings for GT Link.
Index registration (see p. 56) Register index devices.
1.6.1 Basic Setup
Basic Setup tab for GT32-E and an FP-Series PLC
Basic Setup parameters
Field Description
Title Enter the title for the configuration settings file. Titles are convenient if each GT unit
has its own configuration settings.
PLC Model Displays the PLC model that will be connected to the GT.
GT Model Displays the GT model.
Basic Communication Area
to PLC (see p. 24) The basic communication area allows the PLC and GT unit to exchange basic data.
The devices/addresses assigned to this area must be set;
they must not be used
for other purposes, neither by the PLC nor by the GT .
Word Area . Specify the device and starting address for the word area that reads
and writes screen numbers and other information stored in word units.
Bit Area . Specify the device and starting address for the bit area that reads and
writes backlight control and other information stored in bit units.
Disable Data Transmission Disables the data transmission. Use this parameter to prevent download of GT data
to the PLC and vice versa. Note that if you have activated the option and deactivate
it again, you need to clear the FROM (see p. 62)from the system menu. Only