Panasonic GTWIN, Reference Manual

Page: 89 / 297

GT Panel System Menu
GTWIN Reference Manual
88
Entry monitor
Use this monitor to enter values for up to 32 devices (word and bit devices). The device types,
device numbers, and display formats of the devices are held even after you turn off the power.
The example screen shows the following device values:
Device
type
Device
No.
Device
value
Display format
DT 100 50
US1 (decimal, 1 word,
unsigned)
DT 200 -100
S1 (decimal, 1 word,
signed)
R 100
Bit 0
–
3:
ON
Bit 4
–
7:
OFF
—
Option Description
Device type Displays the currently selected device type. Touch the button to change the device type.
Device No.
Displays the number of the device (address). To enter a number, touch the number field and
wait for the keyboard to display. Alternatively, use the [Up]/[Down] buttons to select a device.
Device value

For word devices: device value in the display format selected.

For bit devices: bit status (ON = light/OFF = dark)
Touch the value or bit button to change it.
Display format Only for word devices. Select which display format (see p. 85) should be used.
[Up]/[Down] Use the buttons to scroll through the list of devices.
Forced On/Off
CAUTION
Hazardous situation!
Forcing inputs/outputs is extremely hazardous.
Make sure to pay sufficient attention to the
status of peripheral devices and equipment
before executing this function.
Use this monitor to forcibly turn on or off up to 16 bit devices. The addresses of the devices
entered in this monitor are held even after you turn off the power.
Device
type
Device
No.
Device value
R 100 Forced ON
Y 100 Forced OFF
X 100
Not forced, i.e. free to be
controlled by the PLC.