Panasonic GTWIN Reference Manual Download Page 208

Page: 208 / 297

GTWIN Reference Manual

5.8 Alarm List Parts

207

Tab

Field

Description

Display Frame

Specifies whether the alarm list will be displayed with a frame and what
lines will appear as well as the frame color.

Color

Specifies the color for the alarm message and its background.

Operation
Security



Set the security level to restrict the display and/or operation of the part.

Guidance

Specifies whether the guidance text of the alarm list is displayed on the GT
screen.

Display Text

When this is selected, you need to specify the number of lines for the
guidance text as well as the string and the background color.

Display Area

Specifies the number of lines to display. The line width automatically adapts
to fit the longest list entry.

Display Frame

Sets a frame and its color, if desired.

Change Screen

Change to the screen defined in the Screen No. text box.

Color

Specifies the color for the guidance text and its background.

Element
Setup

Language No.

If you work with multiple languages (see p. 159), you can enter alarm texts
for all languages used.

Message

Double-click an alarm message or select [Setup] to enter the text for each
alarm condition.

Guidance

This column is displayed if you have selected "Display Text" on the
"Guidance" tab. Enter the guidance text to be displayed when the
corresponding function switch is pressed.

Summary of Contents for GTWIN










































































































































































































































































































Search results

Summary of Contents for GTWIN

Reviews:

Related manuals for GTWIN

Brands by name

Popular brands

Panasonic GTWIN, Reference Manual

Search results

Summary of Contents for GTWIN

Reviews:

Related manuals for GTWIN

Brands by name

Popular brands