Panasonic GA-ML Series, Manual

Page: 79 / 496

77
4 Management
4.11 SMTP Settings
4.11 SMTP Settings
Use the following window to implement the SMTP (Simple Mail Transfer
Protocol) settings and display its settings.
Choose Management > SMTP Settings to display the following window.
Figure 4-25 SMTP Settings
In the section of the SMTP Global Settings , you can configure the
following parameters.
Parameter Overview
SMTP IP Choose an IP address type of an SMTP server. The
options available are
IPv4 and IPv6 .
SMTP IPv4
Server Address Choose IPv4 from SMTP IP , and then enter an IPv4
address of an SMTP server.
SMTP IPv6
Server Address Choose IPv6 from SMTP IP , and then enter an IPv6
address of an SMTP server.
SMTP IPv4
Server Port Choose IPv4 from SMTP IP , and then enter the port-
number (value) of an SMTP server. The range is from 1
to 65,535. By default, the value is set to 25.
SMTP IPv6
Server Port Choose IPv6 from SMTP IP , and then enter the port-
number (value) of an SMTP server. The range is from 1
to 65,535. By default, the value is set to 25.
Your Email Address Enter the email address, which indicates a switch.
The number of characters for this character strings can
be up to 254.
Transmission Interval Enter the value of a transmission interval. The range is
from 0 to 65,535 (minutes). By default, the value is set
to 30 minutes.