Panasonic GA-ML Series, Manual

Page: 72 / 496

70
4 Management
4.7 Session Time-out
4.7 Session Time-out
Use the following window to implement the settings on Web, Console,
Telnet and the session time-out of the SSH connection and to display its
settings.
Choose Management > Session Time-out to display the following
window.
Figure 4-17 Session Time-out
In the section of Session Time-out , you can configure the following
parameters.
Click Apply to reflect the change.
Parameter Overview
Web Session Time-
out Enter the time for Web session time-out with the
second-unit. If the
default check-box is set to on, the
value is returned to the default value. The range of
values is from 60 to 36,000 (seconds), and the default
value is set to 3 (minutes).
Console Session
Time-out Enter the time for console session time-out with the
minute-unit. If the default check-box is set to on, the
value returns to the default value. The range of values is
from 0 to 1,439 (minutes). If you enter 0, the time-out
becomes disabled. The default value is set to 3
(minutes).
Telnet Session Time-
out Enter the time for Telnet session time-out with the
minute-unit. If the default check-box is set to on, the
value returns to the default value. The range of values is
from 0 to 1,439 (minutes). If you enter 0, the time-out
becomes disabled. The default value is set to 3
(minutes).
SSH Session Time-out Enter the time for SSH session time-out with the minute-
unit. If the default check-box is set to on, the value
returns to the default value. The range of values is from
0 to 1,439 (minutes). If you enter 0, the time-out
becomes disabled. The default value is 3 (minutes).