Panasonic GA-ML Series, Manual

Page: 124 / 496

122
5 L2 Features
5.3.3 MST Configuration Identification
5.3.3 MST Configuration Identification
Use the following window to implement the settings on an MST
configuration ID and display its settings. This configuration allows you to
identify the Multiple Spanning Tree Instance (MSTI), which is configured
on a switch.
The default of Common Internal Spanning Tree (CIST) can be changed,
but cannot be deleted. In addition, the MSTI ID cannot be changed.
Choose L2 Features > STP > MST Configuration Identification to
display the following window.
Figure 5-35 MST Configuration Identification
In the section of MST Configuration Identification , you can configure
the following parameters.
Click Apply to reflect the change.
In the section of the Instance ID Settings , you can configure the
following parameters.
Parameter Overview
Configuration Name Enter an MST. This name identifies an MSTI uniquely.
If you do not configure a configuration name, a MAC
address for the device, which executes an MSTP, is
displayed in this field.
Revision Level Enter the value of a revision level. The range is from 0 to
65,535. By default, the value is set to 0. The value
identifies the MSTP domain, which is configured on a
switch along with the configuration name.