Panasonic GA-ML Series, Manual

Page: 27 / 496

25
3 System
3.4 System Log 3.4.1 System Log Settings
Click Apply to reflect the change.
In the section of the Console Log settings, you can configure the
following parameters.
Click Apply to reflect the change.
In the section of the SMTP Log settings, you can configure the following
parameters.
Identification Name Enter the identification name you use. The number of
characters can be used up to 15. Specify the name of a
discriminator profile. Based on the filtering standard
stipulated on this profile, buffer-log messages will be
filtered.
Write Delay Enter the delay value of a log. The range is from 0 to
65,535 (seconds). By default, the value is set to 300
(seconds). If you click
Infinite , a function of write-delay
(or delayed writing) becomes disabled.
Parameter Overview
Parameter Overview
Console-log State This parameter enables or disables the state of a global
console-log.
Severity Choose the severity of the information type, which is
logged. The values to choose:
0 (Emergencies) ,
1 (Alerts) , 2 (Critical), 3 (Errors) , 4 (Warnings) ,
5 (Notifications) , 6 (Information) and
7 (Debugging) .
Identification Name Enter an identification name to use it. the number of
characters can be used up to 15. Specify the name of a
discriminator profile. Based on the filtering standard
stipulated on this profile, console-log messages will be
filtered.
Parameter Overview
SMTP Log State This parameter enables or disables the log state of a
global SMTP (Simple Mail Transfer Protocol).
Severity Choose the severity of the information type, which is
logged. The values to choose:
0 (Emergencies) , 1
(Alerts) , 2 (Critical) , 3 (Errors) , 4 (Warnings) ,
5 (Notifications) , 6 (Information) , and 7
(Debugging) .