manualshive.com logo in svg

Panasonic GA-ML Series, Manual

Share
Download
Panasonic GA-ML Series Manual Download Page 112

110

5 L2  Features

  5.2.8.2 

Voice 

VLAN 

Port  

Click 

Apply

 to reflect the change.

Mode 

Chooses a mode. The options available are as follows.

•

Auto Untagged

 - the untagged membership of the 

voice VLAN is automatically learned. 

•

Auto-Tag

 - the tagged membership regarding the 

voice VLAN is learned automatically. 

•

Manual

 -  This configures the voice VLAN 

membership, manually.

If the automatic learning is enabled, ports are 
automatically learned as the voice VLAN member. 
This membership ages out, automatically. If a port 
operates as the auto-tagged mode and captures the 
voice device through the device OUI, the port 
automatically participates in the voice VLAN as the 
tagged member. If the voice device transmits tagged 
packets, the switch changes its priority. If the voice 
device transmits untagged packets, they are transferred 
by PVID (Port VLAN ID). If a port operates as the auto-
untagged mode and captures the voice device through 
the device OUI, the port automatically participates in 
the voice VLAN as the untagged member. If the voice 
device transmits tagged packets, the switch changes its 
priority. If the voice device transmits untagged packets, 
they are transferred through the voice VLAN. If the 
switch receives LLDP-MED (LLDP Media Endpoint 
Discovery) packets, it checks the priority-flag. Switches 
follow the tagged flag and the priority settings. 

Parameter 

Overview 

Summary of Contents for GA-ML Series

















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands