195
6.6 IPv6 Default Route
6.6
IPv6 Default Route
Use the following window to implement the settings on an IPv6 default
route and display its settings.
Choose
L3 Features > IPv6 Default Route
to display the following
window.
Figure 6-15 IPv6 Default Route
In the section of
IPv6 Default Route
, you can configure the following
parameters.
Click
Apply
to add a new entry.
Click
Delete
to delete the entry specified.
If two or more pages exist, enter the page numbers. Then click
Go
to
move to a specific page.
Parameter
Overview
IPv6 Address/
Prefix Length
Enter an IPv6 address and prefix-length for this route.
If
you set
Default Route
to on, use this route for a
default route.
Interface Name
Enter an interface name to be associated with this
route.
Next Hop IPv6
Address
Enter an IPv6 address of the next hop.
Distance
Enter the distance for the static route management. The
range is from 1 to 254. The lower the value, the better
route will be. If not specified, the distance becomes 1
for managing a static-route (by default).
Summary of Contents for GA-ML Series
